Specification:
Material: Environmental Polyolefin.
Heat shrinkable tube ratio: 2: 1.
Minimum Shrinkage Temp: + 70 ℃.
Full Shrinkage Temp: + 110 ℃ maximum.
Operating Temperature: -55 ℃ to + 125 ℃.
Tensile strength: 10.4Mpa.
Dielectric strength: 15 kV / mm.
Flammability: Flame Retardant.
Cutting method: Scissors or sharp knife
Tips for use:
Lighter can be used for shrinking small diameter and shorter ones; heat shrinking tubes with large diameter or longer quantity can be batch shrinked with hot air / hot air gun.
Note:
If you use lighter or candle to heat up the tube, please make sure that the flame is at least 1 CM away from the tube, or the flame may lead to black marks on the tube, which not only impair its appearance, also may burn your electric wire.
Product use:
Widely used in cable insulation protection, insulation treatment at the terminal connection or processing of stress-relief wire processing, insulation protection, solder joint protection, electronic component package resistance, capacitor insulation protection, metal product rust prevention, Anti-corrosion treatment, wire marking or coloring, etc.
Package includes:
(Quantity x diameter x Single length Color)
40pcs x 3.0 x 44mm yellow
80pcs x 5.0 x 45mm blue black
30pcs x 6.0 x 43mm green
50pcs x 7.0 x 44mm red black
20pcs x 9.0 x 44mm black
20pcs x 10.0 x 45mm yellow
10pcs x 14.0 x 44mm red
30pcs x 17.0 x 44mm blue green black