- Using DAC Chipset: CM6642 + CS8416 + CS4398 + TPA6120 + OPA2134
- Headphone amplifier Chipset TPA6120+OP275,DC 12V/1A power input interface,RCA and 6.35mm headphones outputs
- Samping Rate:USB-24bit/192kHz, Optical/Coaxial-24bit/192kHz;USB Digital Audio Amplifier,USB Digital-to-Analog Adapter Decoder & Headphone Amplifier DAC Decoder
- Can match digital power amplifier analog power amplifier,active speakers,Headphone(Headphone amplifier max output power is 320mw/Ω,Frequency Range is 20Hz-20kHz(±3dB) )
- Control ways: Potentiometer knob and touch switch.(Touch switch design,Perfect to avoid the shock sound of switching adjustments)Audio input terminal access device:Smart phone,ipad,DVD,PC,8 advantages,different matching,Let you hear beautiful music anytime, anywhere
Product description
Chipset: CM6642 + CS8416 + CS4398 + TPA6120 + OPA2134
Headphone amplifier maximum output power: 320mw/32Ohm
Product power supply: DC12V/1A ( Included the Power Supply )
Frequency response range: 20Hz-20kHz (±3dB);
Support sampling rate: USB-24bit/192kHz, Coaxial/Optical-24bit/192kHz
PC-USB/Optical/Coacial input sampling frequency:192K/24Bit
PC-USB system support:XP/W7/W8/MAC/linux
Headphone Max power output:305mV 30ohm
Headphone matching impedance:16-300ohm
Signal to noise ratio: ≥105dB
Input sensitivity:0.2mV
Control:Potentiometer knob and tact switch
Input interface: Optical, Coaxial, PC-USB
Output interface : RCA, 6.35MM headphone JACK(6.35MM)
Use the RCA output to remove the 6.35 adapter, otherwise the RCA will not have an output.
Operation Steps
1.Make sure the VOL turn to the minimum.
2.Connect the external back-end equipment to the output interface of sound source.
3.Connect the sound source that needs to be used.
4. Connect to power.(DC power cann’t beyond 12V)
5. Press the power switch.
6. Press the input signal selection switch to select the signal (the default input of boot is PC-USB)
7. Turn the VOL button clockwise to select the desired volume.
8. If the headphone head is 3.5mm, pls use the 6.35mm to 3.5mm Headphone adapter(Golden color),then you can use it well.(The Headphone adapter was included)
8 advantages
PC-USB Operation Instructinos
1. Connect the PC-USB interface of the rear surface of the machine with factory provided USB cable (USB can support hot plug).
2. Press the input signal selection switch to select USB input.
3. The following photo shows the icon with horn symbol in the lower right corner of PC.
4. Right click to pop up the dialog box and click(choose play device.)
5. Select the playback device recognized by PC in the pop-up dialog box (USB of this machine is automatic identification, no manual installation and drive).
6. Click to confirm the identified digital output.
Warning:
1. Please do not open the shell without permission. Improper operation may cause the danger of electric shock.
2. Please use the power supply of the regular manufacturer, otherwise it will damage the machine.
3. Please do not use the machine in a high temperature and humidity environment.
Note:
Please use it correctly according to the instruction and description!
According to your need,free combination(Package included:1pc DAC decoder board,1pc AC/DC adapter,1pc 1.5m PC-USB cable,1pc user manual)
|
|
|
|
|---|---|---|
|
|
|
|
BEST SELLERS
Product Description
Product description
Chipset: CM6642 + CS8416 + CS4398 + TPA6120 + OPA2134
Headphone amplifier maximum output power: 320mw/32Ohm
Product power supply: DC12V/1A ( Included the Power Supply )
Frequency response range: 20Hz-20kHz (±3dB);
Support sampling rate: USB-24bit/192kHz, Coaxial/Optical-24bit/192kHz
PC-USB/Optical/Coacial input sampling frequency:192K/24Bit
PC-USB system support:XP/W7/W8/MAC/linux
Headphone Max power output:305mV 30ohm
Headphone matching impedance:16-300ohm
Signal to noise ratio: ≥105dB
Input sensitivity:0.2mV
Control:Potentiometer knob and tact switch
Input interface: Optical, Coaxial, PC-USB
Output interface : RCA, 6.35MM headphone JACK(6.35MM)
Use the RCA output to remove the 6.35 adapter, otherwise the RCA will not have an output.
Operation Steps
1.Make sure the VOL turn to the minimum.
2.Connect the external back-end equipment to the output interface of sound source.
3.Connect the sound source that needs to be used.
4. Connect to power.(DC power cann’t beyond 12V)
5. Press the power switch.
6. Press the input signal selection switch to select the signal (the default input of boot is PC-USB)
7. Turn the VOL button clockwise to select the desired volume.
8. If the headphone head is 3.5mm, pls use the 6.35mm to 3.5mm Headphone adapter(Golden color),then you can use it well.(The Headphone adapter was included)
8 advantages
PC-USB Operation Instructinos
1. Connect the PC-USB interface of the rear surface of the machine with factory provided USB cable (USB can support hot plug).
2. Press the input signal selection switch to select USB input.
3. The following photo shows the icon with horn symbol in the lower right corner of PC.
4. Right click to pop up the dialog box and click(choose play device.)
5. Select the playback device recognized by PC in the pop-up dialog box (USB of this machine is automatic identification, no manual installation and drive).
6. Click to confirm the identified digital output.
Warning:
1. Please do not open the shell without permission. Improper operation may cause the danger of electric shock.
2. Please use the power supply of the regular manufacturer, otherwise it will damage the machine.
3. Please do not use the machine in a high temperature and humidity environment.
Note:
Please use it correctly according to the instruction and description!
According to your need,free combination(Package included:1pc DAC decoder board,1pc AC/DC adapter,1pc 1.5m PC-USB cable,1pc user manual)
|
|
|
|
|---|---|---|
|
|
|
|
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
