Handheld Bidet Toilet Sprayer SROSS Handheld Bidet Sprayer for Toilet with Adjustable Pressure Control for Feminine Wash, Baby Diaper Cloth and Shower Sprayer for Pets Shower, Wall or Toilet Mount
Turn OFF the water supply valve at the wall next to your toilet. Twist it clockwise as far as it will go. Flush the toilet and hold down the handle to completely empty the toilet tank.
STEP 2: MAKE SURE THERE IS A RUBBER WASHER INSIDE BOTH THE FEMALE ENDS
Confirm that the flat rubber washer is inside the top of your bidet’s T-valve (hint: the top of the T-valve is where the spinning nut is located), and it is pushed all the way down to tighten the connection.
Step 3: Connect the T-Valve and the Hoses
Screw the top of the T-valve onto the toilet’s fill valve where you just unscrewed the water supply hose. Be careful not to over-tighten the connections. Screw the toilet’s water supply hose to the bottom of the T-valve. Connect one end of the handheld bidet hose to the side of the T-valve. Screw the bidet sprayer head onto the other end of the bidet hose.
Step 4: Turn On the Water Supply & Mount the Sprayer
Turn the water supply valve back on. If you notice that any connection is loose or leaking, you may need to add some plumber’s tape. If you’re leak-free, your hand-held bidet sprayer is installed and ready for use!
Toilet Mount: Screw the holder onto the toilet tank clip. Lift up the toilet tank lid, slide the clip onto the side of the tank, and replace the lid.
Wall Mount: Use the drywall screws and anchors to attach the holder to the wall.
Handheld Bidet Toilet Sprayer SROSS Handheld Bidet Sprayer for Toilet with Adjustable Pressure Control for Feminine Wash, Baby Diaper Cloth and Shower Sprayer for Pets Shower, Wall or Toilet Mount
Handheld Bidet Toilet Sprayer SROSS Handheld Bidet Sprayer for Toilet with Adjustable Pressure Control for Feminine Wash, Baby Diaper Cloth and Shower Sprayer for Pets Shower, Wall or Toilet Mount
Turn OFF the water supply valve at the wall next to your toilet. Twist it clockwise as far as it will go. Flush the toilet and hold down the handle to completely empty the toilet tank.
STEP 2: MAKE SURE THERE IS A RUBBER WASHER INSIDE BOTH THE FEMALE ENDS
Confirm that the flat rubber washer is inside the top of your bidet’s T-valve (hint: the top of the T-valve is where the spinning nut is located), and it is pushed all the way down to tighten the connection.
Step 3: Connect the T-Valve and the Hoses
Screw the top of the T-valve onto the toilet’s fill valve where you just unscrewed the water supply hose. Be careful not to over-tighten the connections. Screw the toilet’s water supply hose to the bottom of the T-valve. Connect one end of the handheld bidet hose to the side of the T-valve. Screw the bidet sprayer head onto the other end of the bidet hose.
Step 4: Turn On the Water Supply & Mount the Sprayer
Turn the water supply valve back on. If you notice that any connection is loose or leaking, you may need to add some plumber’s tape. If you’re leak-free, your hand-held bidet sprayer is installed and ready for use!
Toilet Mount: Screw the holder onto the toilet tank clip. Lift up the toilet tank lid, slide the clip onto the side of the tank, and replace the lid.
Wall Mount: Use the drywall screws and anchors to attach the holder to the wall.
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.