Warnings
-
Do not use product in microwave, on stove top, or in any type of oven
-
Not recommended for use by children especially when product contains hot contents
-
Always test temperature of contents before consuming
-
Do not overfill the container to avoid overflow
-
Check periodically to make sure the gasket is properly positioned to prevent leakage
-
Do not carry or transport product other than in an upright position
-
Always use care to maintain product in an upright position when transporting or carrying product
-
Do not place product in a bag, backpack or other container as it may shift from an upright position
General Care
· Before first use, and as soon as possible after each use, wash all parts with warm, soapy water.
· Contents should not be left in the container for longer than 24 hours. As soon as possible after each and every use, wash all parts with warm, soapy water. Rinse all parts thoroughly with clean water. Allow all parts to dry completely prior to next use or storage
· Do not use abrasive cleaners or scrubbers since they may dull the finish.
· Do not use bleach or cleaners containing chlorine on any parts of the product.
· This product is top-rack dishwasher safe; however, hand washing is recommended as the dishwasher uses harsher detergents and hot water that may affect the appearance of your product.
· For maximum thermal efficiency, preheat or pre-chill the product just prior to use. Fill with hot/cold tap water, attach lid, let stand 5 to 10 minutes and empty water. After filling container with contents, re-cover with lid to increase thermal efficiency.
Care and Use Guide
Twist and Sip Lid Assembly
1. Remove lid (A) by twisting counterclockwise
2. To remove lid dial (A1) from underside of lid (A):
a) twist the lid dial (A1) counterclockwise to the fully open position and align the dial tabs (A2) with the lid slots.
b) once aligned, squeeze the dial tabs (A2) and push the lid dial (A1) through the lid (A)
3. Remove gasket (A3) from underside of lid (A)
4. Wash all parts separately, and then re-assemble
a) Ensure gasket (A3) is properly seated to minimize leaking
5. Fill container (B) with contents. Do not overfill: Leave space for lid (A), to avoid overflow
6. Replace lid (A) and twist clockwise to seal
7. To drink, follow the lid icons and twist lid dial (A1) counterclockwise to desired drinking position
8. When finished drinking, close lid (A) by twisting lid dial (A1) clockwise to the closed position