Radio Freqency Signal Detector for Hidden Cameras, Wireless Bugs, GPS Locator
3 modes: It can detect radio frequency wireless signal, magnetic field and laser scanning hidden cameras.
It can detect hidden cameras, wireless bugs, 2G 3G 4G phone SIM card, recording devices, GPS trackers.
It can detect wired or standby cameras with the viewfinder by the red spot reflected by cameras.
It can detect the magnetic devices with the GS probe.
How to Detect RF Signal?
Turn the switch knob clockwise to the maximum, the MS red light will light up.
Cut off the RF signal noises (put your phone on airplane mode)
Detect widely around, when there is RF signal, the signal indicator will light up and beep when up to level 7 (switch the beep to vibration by press the "M" key).
To locate the RF signal, you need to turn down the sensitivity to level 4. The closer to the RF signal, the longer of the signal indicator. Detect around again according to the strength of the signal indicator to find the devices.
How to Detect Wired Hidden Cameras?
Turn on the switch knob clockwise, the MS red light will light up.
Turn on the laser switch, use the viewfinder to look for the red spot reflected by cameras, you can cover the viewfinder with your phone's camera to amplified the view.
It can effectively detect hidden cameras when there are lots of RF signal noises or some cameras can not transmit RF signal.
How to Detect Magnetic Fields?
Turn on the switch knob clockwise, the MS red light will light up.
Switch to GS mode by holding down the MS button for a few seconds, the GS blue light will light up
Approach the magnetic fields with the GS Probe, the tip will light up.
Control the distance to the magnetic devices to reduce the radiation danger.