Upon receipt of the goods, you only need to weld the LED lamp based on the paper welding instructions and plug in the 5V usb power supply to display brilliant lighting effects. There are already more than 20 kinds of gorgeous animation effects built in the main board. If you need to modify the displayed patterns, you can download the information of the electronic files at the following link, which include more clear photos of the production process, 3D animation software and instructions for use, and instructions for downloading the program.
Please download the instructions at the following link:
https://drive.google.com/open?id=1YYw6fDU2zbKVlcF7XnJDQR83HCsZ6HyP
The following link is a video of the DIY installation instructions.
https://www.youtube.com/watch?v=4a3OMpjdTn8
The following link is a video of the animation modification software.
https://www.youtube.com/watch?v=tGaJr17tRak
This is a DIY soldering package, the package contains the following electronic components:
1, Soldered and tested main board (size: 7.08*7.28inch) x1
2, USB download tool x1
3, USB-DC cable x1
4, 0.8mm tinned iron wire x 80cm
5, White electronic line x 100cm
6, 2mm acrylic strip (used for bending LED anode) x1
7, Foggy highlight square 2*5*7mm 600 blue leds (As a matter of fact, only 512 LED lamps will be used, but to prevent damage to LED lamps during manufacture, each lamp bead is provided for standby)
8, Red and black wires for testing LED x1
9, Paper welding instructions x1
Hardware Features:
Microcontroller-chip: STC12C5A60S2
Driver chip: 74HC573 + APM4953, the horizontal 8 layers are positive electrodes and the vertical 64 columns are negative electrodes.
Finished product size: 7.08*7.28*7.88inch
The distance between the leds is 0.9inch