Under Armour Protege 16 Ounce Stainless Steel Hydration Bottle, Hyper Green
['Vacuum-insulated for maximum temperature retention—keeps beverages cold for 14 hours', 'Stainless steel interior & exterior provide durability that you can count on', 'Leak-resistant locking flip-top lid with one-hand push-button operation so you can drink on the go quickly & easily', 'Flip-up clip on carry loop so you can hook your bottle onto your bag', 'BPA Free 16oz. Capacity']
Do not use product in microwave, on stove top, or in any type of oven
Not for use with hot liquids: For cold liquids only
Do not overfill the container: Leave space at top of container for lid to avoid overflow
Check periodically to make sure any gasket properly positioned to prevent leakage
Contents should not be left in container for longer than 24 hours
Do not use tools or devices to force container to open
If you are unable to open container by hand, do not open it and dispose of it
Do not use to store or carry carbonated drinks or dry ice.This may cause contents to eject or leak.
General Care
· Before first use, wash all parts with warm, soapy water. Rinse all parts thoroughly and allow time to dry.
· Contents should not be left in the container for longer than 24 hours.
· Do not use abrasive cleaners or scrubbers since they may dull the finish.
·Do not use bleach or cleaners containing chlorine on any parts of the product.
· This product is top-rack dishwasher safe; however, hand washing is recommended as the dishwasher uses harsher detergents and hot water that may affect the appearance of your product.
· For maximum insulation efficiency, prechill the product just prior to use. Fill with cold tap water, attach lid, let stand 5 to 10 minutes and empty water.
Care and Use Guide
Hard Spout Locking-Ring Lid Assembly
1. Remove lid (A) by twisting counterclockwise.
2. Pull down the locking-ring (B) (if present) located on lid (A). Press the push-button (D) on the lid (A) to open lid cover (C).
3. Pull out spout gasket (C1) from underside of lid cover (C) to completely remove it.
4. Wash all parts separately and re-assemble.
a. Ensure gaskets are properly seated to minimize leaking
5. Fill container with contents. Do not overfill: Leave space for lid (A) to avoid overflow.
6. Replace the lid (A) by twisting it clockwise.
7. To drink, pull down the locking-ring (B) (if present) located on lid (A). Push the button (D) located on the lid (A), which will release the lid cover (C) and reveal the drink opening.
8. When finished drinking, close and lock the lid cover (C) by securing the locking-ring (B) (if present) over the push-button (D).
The UA protege 16oz. Water bottle has similar features to our larger stainless steel water bottles, but in smaller size. Perfect for using alongside our coordinating lunch boxes and backpacks, this bottle is the ultimate accessory for school and game Day.
Do not use product in microwave, on stove top, or in any type of oven
Not for use with hot liquids: For cold liquids only
Do not overfill the container: Leave space at top of container for lid to avoid overflow
Check periodically to make sure any gasket properly positioned to prevent leakage
Contents should not be left in container for longer than 24 hours
Do not use tools or devices to force container to open
If you are unable to open container by hand, do not open it and dispose of it
Do not use to store or carry carbonated drinks or dry ice.This may cause contents to eject or leak.
General Care
· Before first use, wash all parts with warm, soapy water. Rinse all parts thoroughly and allow time to dry.
· Contents should not be left in the container for longer than 24 hours.
· Do not use abrasive cleaners or scrubbers since they may dull the finish.
·Do not use bleach or cleaners containing chlorine on any parts of the product.
· This product is top-rack dishwasher safe; however, hand washing is recommended as the dishwasher uses harsher detergents and hot water that may affect the appearance of your product.
· For maximum insulation efficiency, prechill the product just prior to use. Fill with cold tap water, attach lid, let stand 5 to 10 minutes and empty water.
Care and Use Guide
Hard Spout Locking-Ring Lid Assembly
1. Remove lid (A) by twisting counterclockwise.
2. Pull down the locking-ring (B) (if present) located on lid (A). Press the push-button (D) on the lid (A) to open lid cover (C).
3. Pull out spout gasket (C1) from underside of lid cover (C) to completely remove it.
4. Wash all parts separately and re-assemble.
a. Ensure gaskets are properly seated to minimize leaking
5. Fill container with contents. Do not overfill: Leave space for lid (A) to avoid overflow.
6. Replace the lid (A) by twisting it clockwise.
7. To drink, pull down the locking-ring (B) (if present) located on lid (A). Push the button (D) located on the lid (A), which will release the lid cover (C) and reveal the drink opening.
8. When finished drinking, close and lock the lid cover (C) by securing the locking-ring (B) (if present) over the push-button (D).
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.